All Market Notes
Published 4 November 2026

Solar and batteries: building near net-zero without overspending

Adding solar and a battery to a new SA or Victorian home makes sense, but the design decisions you make at contract stage will determine whether it pays off.

The short version
  • NCC 2025 requires 7-star NatHERS for all new homes, so the energy envelope should come before you spec any solar or battery.
  • Oversizing a battery system to impress on paper is one of the most common ways owner-builders waste money at fit-out stage.
  • SA and Victoria have different grid export rules and feed-in structures, so your state shapes what a viable system actually looks like.
  • Lock in conduit, switchboard space and roof orientation at contract stage. Retrofitting these after handover costs significantly more.

Start with the shell, not the solar panels

There is a predictable pattern among people building their first home: they spend weeks comparing battery brands and solar inverters before they have even settled on insulation specs or window glazing. It is the wrong order. Under the NCC 2025 energy provisions, every new home in Australia must meet a 7-star NatHERS thermal performance rating. That standard is about the building fabric itself, the orientation, the wall and ceiling insulation, the windows, the shading. Get those elements right first and the demand your solar system needs to meet shrinks considerably. A smaller, well-matched system almost always outperforms a large system bolted onto a thermally leaky house.

What near net-zero actually means in practice

Near net-zero is not a certification. It is a design outcome where annual energy consumed from the grid is roughly offset by what the home generates and exports. Reaching it in Adelaide or Melbourne is achievable on a standard suburban block, but it requires the solar array, the battery, the hot water system and the space conditioning to be treated as a single integrated system, not a series of separate upgrades. The homes that fall short are usually those where the builder handled the structural shell and the owner added energy gear later, often with conduit runs that were never planned for, switchboards that need expensive upgrades and roof pitches that compromise panel output.

How SA and Victoria differ

South Australia has long been at the leading edge of household battery uptake, partly because the state grid has historically delivered some of the most volatile wholesale pricing in the country. Recent reporting points to SA recording its strongest new home approval numbers on record, which means a large cohort of buyers is making energy decisions right now, at contract stage, where those decisions are cheapest to get right. New greenfield communities are opening across the northern and southern fringes of Adelaide, and the energy infrastructure assumptions in those areas can vary, so it is worth confirming grid capacity and any estate-level energy covenants before you finalise your system design.

In Victoria, VBA-registered builders are required to carry domestic building insurance, and the energy compliance pathway under NatHERS is the same 7-star minimum. However, Victoria's feed-in tariff structure and distribution network rules around export limiting differ from SA's, which affects how you size a battery. A system optimised for a high feed-in environment performs differently to one designed primarily for self-consumption behind the meter. Know which model suits your location before committing to a system size.

Where people over-capitalise

The most common misstep is battery oversizing. A household that runs efficient appliances, has good thermal performance and is not running an electric vehicle at home will rarely justify the largest battery tier a salesperson demonstrates. The payback period on that extra capacity can stretch well beyond the warranty life of the cells. Similarly, premium all-in-one inverter-battery units carry a brand premium that is not always reflected in real-world cycle performance. Get a load assessment done by an accredited designer before accepting any system quote at face value.

Roof orientation is the other area where new builds routinely leave money on the table. A north-facing roof plane in both Adelaide and Melbourne generates meaningfully more annual output than east-west split configurations, yet many volume home designs optimise the facade for streetscape appeal rather than solar yield. If you are choosing or modifying a design, ask your builder specifically how the roof is oriented relative to the allotment, and whether the standard plan can be mirrored or adjusted.

What to lock in at contract stage

Even if you do not plan to install solar or a battery at handover, the contract stage is when to future-proof the home at minimal cost. That means:

  • Conduit runs from the roof space to the switchboard, sized for the cabling a future system will need.
  • Switchboard capacity with space for a solar isolator, battery isolator and any EV charger circuit.
  • Hot water choice, because a heat pump hot water system integrated with solar generation is consistently one of the highest-returning energy investments available.
  • Slab or ceiling provisions for ducted or split system wiring, so heating and cooling is not an afterthought.

What to watch

Grid export limits are tightening in parts of both states as rooftop solar penetration rises. Distribution networks are increasingly applying zero or near-zero export limits to new connections in high-saturation areas, which shifts the economic case firmly toward self-consumption and storage rather than export revenue. If your site is in a growth corridor where dozens of new homes are connecting simultaneously, confirm the export conditions with the relevant network operator before finalising your system design. That single conversation could change your battery sizing calculation entirely.

BuildPilot is independent. This note is general information for people building or renovating a home in South Australia and Victoria, not financial, legal or construction advice. Always confirm figures and contract terms directly with your builder and advisers.

Ready to find your builder?

Our 4-minute matcher shortlists three Adelaide builders whose portfolio fits your block, budget and brief.

Match me with 3 builders

Analytics & advertising cookies. Learn more