Split-Level Home in Curlewis, Bellarine Geelong
A split-level home is designed to step down or up a sloping block, following the natural contour rather than fighting it. Done well it saves tens of thousands in retaining walls and cut and fill. Done poorly it becomes an expensive lesson in why a sloping block is not just a flat block with a discount.
What to know about Curlewis
Fast-growing Bellarine Peninsula suburb with master-planned estates in the Jetty Road growth area near Clifton Springs.
This is a greenfield growth pocket, which means recently released blocks, project builders on standby, and fewer overlays to worry about. Titled land is common.
Cost snapshot
Split-Level Home build costs in Curlewis
Base-build rate (mid-range)
$2,700 - $3,600/m²
RLB Q4 2025 — Melbourne, custom (excl. GST)
Typical floor area
200–320 m²
Habitable area, indicative
Indicative build cost
$540,000 – $1.15M
Base build only; excludes land, site works, fees & GST
Build timeframe
12–18 months
Design to handover
Approval pathway
10–18 weeks (engineering + planning on slope)
Lodged with City of Greater Geelong
Victoria average (ABS)
$485,292 · $1,914/m²
ABS Building Activity 2024–25, completed detached house
Indicative planning figures only — a builder's fixed-price contract is always final. Sourced from RLB Rider Digest (Q4 2025), ABS Building Activity 2024–25, Cotality Cordell CCCI.
Local build notes for Curlewis
Council
City of Greater Geelong
Where people are building
Jetty Road growth area, Curlewis Parks, Kingston
Typical lots
New 350–500 m² coastal-estate lots within the Jetty Road precinct.
Council rules and overlays for split-level home in this area
In Victoria, a new build generally needs a planning permit (where the local planning scheme requires one) and a building permit issued by a registered building surveyor. Overlays such as Bushfire Management, Heritage, Significant Landscape and Development Contributions can apply, and growth-area blocks may attract the Growth Areas Infrastructure Contribution (GAIC). Confirm current requirements with your local council and the Victorian Building Authority before finalising a design.
The 3 decisions that shape your split-level home in Curlewis
Cut and fill versus split-level
Cutting a sloping block flat can add $30k to $100k in earthworks and retaining. A split-level design absorbs the slope into the floor plan instead.
Which levels get which rooms
The classic Geelong split puts living upstairs for the view and bedrooms downstairs for cooler sleeping. But the right answer depends on your block's aspect.
Access and future proofing
Stairs between levels can make a split-level house harder to age in. Ask about lift-ready cavities during design if you plan to stay long-term.
Split-Level Home FAQs for Curlewis
What slope justifies a split-level design?▾
Generally anything with more than 1.5 metres of fall across the building envelope. Below that a flat-block design with modest cut is usually cheaper.
Are split-level homes more expensive to build?▾
On a like-for-like flat block they cost more. On a sloping block a well-designed split-level is often cheaper than a flat design that requires extensive earthworks.
Can I get a split-level home from a project builder?▾
Some project builders offer sloping-block ranges. Custom builders and design-and-construct firms handle genuine split-level design better because each block is different.
What about drainage on a slope?▾
Councils require detailed stormwater plans on sloping sites. Ag drains, subsoil drains and retaining wall weep holes all matter. Get the civil engineer involved early.
Will a split-level home resell easily?▾
In sloping-block suburbs, yes. Good split-level design is prized. In flat-block suburbs a split-level design is unusual and can narrow your buyer pool.
People also ask
Building a split-level home in Curlewis
Which council approves a split-level home in Curlewis?▾
Curlewis sits in City of Greater Geelong. That council administers the planning scheme and any overlays across the suburb, while your building permit and the mandatory inspections run through a registered building surveyor.
Where are new split-level homes being built in Curlewis?▾
Most of the building activity in Curlewis is around Jetty Road growth area, Curlewis Parks and Kingston.
What lot sizes are typical for a split-level home in Curlewis?▾
New 350–500 m² coastal-estate lots within the Jetty Road precinct.