Granny Flat in Mylor, Adelaide Hills Adelaide
A granny flat is a self-contained secondary dwelling on the same block as an existing house. Adelaide granny flats are hugely popular for teenager retreats, aged parents, home offices and rental income, but the rules on what you can and cannot rent out separately vary by council.
What to know about Mylor
Acreage Hills with bushfire overlay.
Bushfire overlay is a defining constraint here. Every design decision has to account for BAL rating, ember protection and evacuation access.
Cost snapshot
Granny Flat build costs in Mylor
Base-build rate (mid-range)
$2,200 - $2,800/m²
RLB Q4 2025 — Adelaide, custom (excl. GST)
Typical size
50–90 m²
Habitable area, indicative
Indicative build cost
$110,000 – $250,000
Base build only; excludes land, site works, fees & GST
Build timeframe
6–10 months
Design to handover
Approval pathway
6–12 weeks (often building consent only under 60m²)
Lodged with Adelaide Hills Council
South Australia average (ABS)
$389,949 · $1,788/m²
ABS Building Activity 2024–25, completed detached house
Indicative planning figures only — a builder's fixed-price contract is always final. Sourced from RLB Rider Digest (Q4 2025), ABS Building Activity 2024–25, Cotality Cordell CCCI.
Local build notes for Mylor
Council
Adelaide Hills Council
Where people are building
the Mylor township, Aldgate surrounds, the Onkaparinga Valley
Typical lots
Leafy, often sloping blocks in a designated bushfire-prone area, so a BAL assessment, bushfire-rated construction and native-vegetation controls shape the design and budget.
Council rules and overlays for granny flat in this area
Playford, Salisbury, Onkaparinga and Marion are granny-flat friendly with clear pathways. Burnside and Adelaide City can be tougher because of heritage and character zoning.
The 3 decisions that shape your granny flat in Mylor
Attached or detached
Detached granny flats give privacy and are easier to lease separately. Attached extensions cost less because they share a wall and services.
Can you legally rent it out?
Some councils allow separate leases, others treat granny flats as ancillary to the main dwelling. Get this in writing before you build.
Site drainage
A second roof on the same block doubles stormwater load. Councils will ask how you plan to handle it.
Granny Flat FAQs for Mylor
How big can my granny flat be?▾
Under 60m² of habitable floor area is usually the cutoff for streamlined planning consent, though the exact rule varies by council. Larger granny flats need full development approval.
Can I rent my granny flat separately?▾
It depends on your council. Some allow separate tenancies, others only allow it to house family. Confirm with council in writing before you build.
Does it need its own driveway?▾
Not required in most cases but recommended if the granny flat is intended for a separate tenant. Off-street parking allocation matters at planning consent stage.
Will building a granny flat add to my rates?▾
Yes, adding habitable floor area typically increases your capital improved value and therefore your council rates. The uplift is usually modest.
Do I need a separate meter?▾
You can either sub-meter the granny flat under the main house account or install a separate connection. Separate is cleaner if you plan to rent it out.
People also ask
Building a granny flat in Mylor
Which council approves a granny flat in Mylor?▾
Mylor sits in Adelaide Hills Council. That council administers the planning scheme and any overlays across the suburb, while your building permit and the mandatory inspections run through a registered building surveyor.
Where are new granny flats being built in Mylor?▾
Most of the building activity in Mylor is around the Mylor township, Aldgate surrounds and the Onkaparinga Valley.
What lot sizes are typical for a granny flat in Mylor?▾
Leafy, often sloping blocks in a designated bushfire-prone area, so a BAL assessment, bushfire-rated construction and native-vegetation controls shape the design and budget.