Dual Occupancy in Aldgate, Adelaide Hills Adelaide
Dual occupancy is two dwellings on one title where the block is not subdivided. Common configurations are a house at the front and a smaller dwelling behind, or an upstairs-downstairs split. Cheaper and faster than a duplex-plus-subdivision, but it stays as one title so both sides sell together.
What to know about Aldgate
Premium leafy, bushfire-zone, sloping blocks.
Bushfire overlay is a defining constraint here. Every design decision has to account for BAL rating, ember protection and evacuation access.
Cost snapshot
Dual Occupancy build costs in Aldgate
Base-build rate (mid-range)
$2,200 - $2,800/m²
RLB Q4 2025 — Adelaide, custom (excl. GST)
Typical floor area
280–380 m²
Habitable area, indicative
Indicative build cost
$615,000 – $1.06M
Base build only; excludes land, site works, fees & GST
Build timeframe
14–22 months
Design to handover
Approval pathway
12–20 weeks (planning consent)
Lodged with Adelaide Hills Council
South Australia average (ABS)
$389,949 · $1,788/m²
ABS Building Activity 2024–25, completed detached house
Indicative planning figures only — a builder's fixed-price contract is always final. Sourced from RLB Rider Digest (Q4 2025), ABS Building Activity 2024–25, Cotality Cordell CCCI.
Local build notes for Aldgate
Council
Adelaide Hills Council
Where people are building
the Aldgate village, Stirling surrounds, Bridgewater
Typical lots
Leafy, often sloping blocks in a designated bushfire-prone area, so a BAL assessment, bushfire-rated construction and native-vegetation controls shape the design and budget.
Council rules and overlays for dual occupancy in this area
Onkaparinga, Salisbury, Charles Sturt and Marion are dual-occ friendly. Heritage overlays in inner suburbs (Unley, Norwood, Adelaide City) often complicate consent.
The 3 decisions that shape your dual occupancy in Aldgate
Front-back vs stacked
Front-back needs a longer block and a shared driveway. Stacked (upstairs-downstairs) works on smaller blocks but the layout is more design-constrained.
Single title trade-offs
The block cannot be split. If you plan to sell one side to help fund the other, dual occupancy is the wrong structure. Look at duplex-with-subdivision instead.
Privacy and independence
Separate entries, private outdoor space and acoustic separation matter more than most owners plan for. Get the layout critiqued by someone who will actually live there.
Dual Occupancy FAQs for Aldgate
How is dual occupancy different from a duplex?▾
A duplex ends up as two separate titles. Dual occupancy stays as one title. You cannot sell one dwelling of a dual occupancy without selling the other.
Can I rent one dwelling and live in the other?▾
Yes. This is one of the most common dual-occ strategies, especially for aging parents or adult children.
Does dual occupancy add value?▾
Usually yes, but less per m² than a duplex-with-subdivision would. The market pays for optionality that dual occupancy does not deliver.
Can I convert dual occupancy to a duplex later?▾
Sometimes. It depends on whether the original design supports service separation and boundary compliance for a future subdivision. Get this planned in from day one if it is a possibility.
Do I need two street addresses?▾
Councils usually assign an A/B or 1/2 subaddress. This is functional but not the same as two separate titles.
People also ask
Building a dual occupancy in Aldgate
Which council approves a dual occupancy in Aldgate?▾
Aldgate sits in Adelaide Hills Council. That council administers the planning scheme and any overlays across the suburb, while your building permit and the mandatory inspections run through a registered building surveyor.
Where are new dual occupancys being built in Aldgate?▾
Most of the building activity in Aldgate is around the Aldgate village, Stirling surrounds and Bridgewater.
What lot sizes are typical for a dual occupancy in Aldgate?▾
Leafy, often sloping blocks in a designated bushfire-prone area, so a BAL assessment, bushfire-rated construction and native-vegetation controls shape the design and budget.